Product Description
Product Description
WLD Screw Air Compressor,Air Dryer,Air Tank and Filter
Product Parameters
1. Screw Air Compressor
| Screw Air Compressor A Series | ||||||
| Model | WLD-10A | WLD-15A | WLD-20A | WLD-30A | WLD-40A | WLD-50A |
| Air volume/Air pressure(m3/min/Mpa) | 1.35/0.7 | 1.8/0.7 | 2.5/0.7 | 3.8/0.7 | 5.2/0.7 | 6.5/0.7 |
| 1.2/0.8 | 1.6/0.8 | 2.3/0.8 | 3.4/0.8 | 5.0/0.8 | 6.1/0.8 | |
| 1/1.0 | 1.3/1.0 | 2/1.0 | 3.1/1.0 | 4.3/1.0 | 5.5/1.0 | |
| 0.8/1.2 | 1/1.2 | 1.7/1.2 | 2.7/1.2 | 3.8/1.2 | 4.9/1.2 | |
| Ambient temperature(ºC) | -5~+45ºC | |||||
| Cooling way | air cooling | |||||
| Discharge temperature(ºC) | ambient temperature <15ºC | |||||
| Lubrication oil(L) | 6 | 12 | 18 | 20 | 20 | 29 |
| Noise(dBA) | 66±2 | 68±2 | ||||
| Driving way | belt drive | belt drive | belt drive | direct drive | ||
| Electricity(V/ph/Hz) | 380/3/50 | |||||
| Power(KW) | 7.5 | 11 | 15 | 22 | 30 | 37 |
| Starting method | Y-△Starter | |||||
| Dimension(mm) L | 960 | 1100 | 1100 | 1380 | 1500 | 1500 |
| W | 580 | 710 | 710 | 850 | 1000 | 1000 |
| H | 770 | 1100 | 1100 | 1250 | 1350 | 1350 |
| Net Weight(kg) | 178 | 327 | 337 | 500 | 683 | 683 |
| Outlet pipe dia(inch) | 1/2″ | 1″ | 1″ | 5/4″ | 3/2″ | 3/2″ |
Direct drive screw air compressor
Connected with rotor, motor and it’s outer case form a unit which can achieve zero maintenance. Besides, due to less spare parts, direct drive has less transmission loss to make it more stable and get longer life.
2.Air dryer
Refrigerated air dryer
Advantage
- Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
- High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
- Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
- Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
- Pressure protection switch-avoid damage to dryer compressor if any fault
- Protective welding way-ensure cleanness in cooling system and avoid to block system
- Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CHINAMFG compressor, CHINAMFG expansion valve, Saginomiya solenoid valve.
- Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
- Compact outline-small size, less weight, easy to install and disassemble
- Strict QC-test completely before leaving factory to ensure 100% good products.
Refrigerated air dryer
Advantage
- Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
- High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
- Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
- Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
- Pressure protection switch-avoid damage to dryer compressor if any fault
- Protective welding way-ensure cleanness in cooling system and avoid to block system
- Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CHINAMFG compressor, CHINAMFG expansion valve, Saginomiya solenoid valve.
- Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
- Compact outline-small size, less weight, easy to install and disassemble
- Strict QC-test completely before leaving factory to ensure 100% good products.
Air Dryer Technical Specification
| Model | WLD-10 | WLD-20 | WLD-30 | WLD-50 |
| Air volume(m3/min) | 1.5 | 2.5 | 3.8 | 6.7 |
| Working condition | A. entrance temp 80ºC B. environment temp 45ºC C. air pressure 10 kg/cm2 | |||
| Pressure dewpoint | 2~10ºC | |||
| Refrigerant | R22 | |||
| Refrigerant Motor(HP) | 0.35 | 0.5 | 0.75 | 0.8 |
| Electricity | AC 220V 50 | |||
| Dimension(mm)L | 620 | 750 | 800 | 930 |
| W | 410 | 420 | 425 | 485 |
| H | 650 | 730 | 810 | 900 |
| Weight(kg) | 38 | 60 | 73 | 92 |
3.Air tank
| AIR TANK DATA | ||||||||||||||||
| NO. | Specifications | Temp(ºC) | Total height(mm) | Inside size (mm) | Air inlet port | Air outlet port | Support pillar | Blowdown valve connector(inch) | Compressor capacity parameters(m3/min) | |||||||
| Volume(m3) | Pressure(MPa) | Height(mm) | Port Size(mm) | Connector(inch) | Height(mm) | Port size(mm) | Connector(inch) | Separation distance (mm) | Size (mm) | |||||||
| 1 | 0.3 | 0.8 | 150 | 1592 | 550 | 642 | 25 | 1 | 1242 | 25 | 1 | 400 | 20 | 0.5 | 2.6-3 | |
| 1 | 1592 | |||||||||||||||
| 1.3 | 1598 | |||||||||||||||
| 3 | 0.6 | 0.8 | 150 | 1905 | 700 | 680 | 40 | 1.5 | 1550 | 40 | 1.5 | 490 | 24 | 0.5 | 4.8-6 | |
| 1 | ||||||||||||||||
| 1.3 | ||||||||||||||||
| 4 | 1 | 0.8 | 150 | 2240 | 800 | 760 | 40 | 1.5 | 1760 | 40 | 1.5 | 560 | 24 | 0.5 | 8-10 | |
| 1 | 2243 | |||||||||||||||
| 1.3 | 2291 | |||||||||||||||
4.Filter
Precision filter
Function
Filter out ozone, gas and particulates in compressed air.
Multi filter material include borosilicate fiber, glass fiber, acticarbon fiber, unwoven fabric and stainless steel mesh.
C filter, remove most liquid and 3 μm above particulates, oil content as low as 5ppm and little water, dust and oil mist.
T filter, remove 1μm above liquid and particulates, oil content reach 0.5ppm.
A filter, remove 0.01μm above liquid and particulates, oil content reach 0.001ppm
Associated Products
WLD Air compressor
Company Profile
Product Showroom
Meeting Room
Exhibition
FAQ
FAQ
Q1:Are you Manufacturer or Trading Company?
A:We are a professional manufacturer with our own export department.
Our factory was established in 2000.
Q2:Where is your factory located? How can I visit there?
A:Our company is located in HangZhou City, China.All clients, from home and abroad,are warmly welcomed to visit us.
Q3. What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.
Q4. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q5. What is your terms of delivery?
A: Normally our quotation is under FOB HangZhou, but we also accept EXW, FOB, CFR, CIF, DDU.
Q6. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.
Q7.Can we customize our product?
A:Yes,you can.Customized material and standard are acceptable. We can provide different standards according to your market and favor.
Q8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Q9: Why choose WeiLongDa?
A1. Wallboard – All WLD spray booth wall panels are anti-fire EPS,foam density is 14kg/m²;
A2. Front door – with aluminum view window, made of 50mm EPS, 0.8mm galvanized steel with plastic spray. Front door is like a face, beautiful, strong, practical, leakproof, anti-rusting & long-lasting, it means your workshop will attract more business and you will spend less time and money on spray booth maintenance;
A3. Steel structure – 4000kg vehicle can safely get in and out of the booth without worried, no noise, vibration is minimized, no air leakage, dust free, clean and efficient, we use thick galvanized steel pipes to make our spray booth cabinet, so our cabinet is anti-rusting;
A4. Heat exchanger – 2 layers radia pipes structure with 2 CHINAMFG welded by experienced skillful welder, it is high efficiency & safe;
A5. Motor fan – introduced from Simens technology with large air flow at low noise, high quality bearing, full cooper coils, rock wool sound proff cover;
A6. Components finishing – since CHINAMFG factory has its own powder coating facility, all components seen were with powder coated treatment. Strong anti-rusting finishing, not just good looking but also make a durable spray booth.
A7. Advantages of CHINAMFG control panel – 1) dust free 2) user can intuitively see the booth actual operation status from the panel 3) spray temperature and baking temperature were set in internal memory, no need to reset temperature when change the mode 4) digital pressure display with over pressure alarm 5) over heat fire alarm system 6) we offer 1 year warranty, life-long maintenance for our booth;
A8. Small details – 1) hinge type ceiling filter frame, 1 person can handle changing filter 2) flter is self sealing no need screw to fix 3) fan filter is easy to access with small door and handle 4) front door locking pin with position locking 5) infrared lamp with rock wool isolation 6) infrared lamp install with isolation distance 7) infrared lamp with door open security sensor switch 8) infrared lamp with wire entrance prastic screw.
| After-sales Service: | Online & Others |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
What role do air dryers play in compressed air systems?
Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:
1. Moisture Removal:
Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.
2. Contaminant Removal:
In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.
3. Protection of Equipment and Processes:
By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.
4. Improved Productivity and Efficiency:
Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.
5. Compliance with Standards and Specifications:
Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.
By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.
.webp)
How do you maintain proper air quality in compressed air systems?
Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:
1. Air Filtration:
Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.
2. Moisture Control:
Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.
3. Oil Removal:
If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.
4. Regular Maintenance:
Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.
5. Air Receiver Tank Maintenance:
Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.
6. Air Quality Testing:
Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.
7. Education and Training:
Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.
8. Documentation and Record-Keeping:
Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.
By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.
.webp)
Are there portable air compressors available for home use?
Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:
1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.
2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.
3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.
4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.
5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.
6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.
7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.
When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.
Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.
editor by CX 2023-11-20