Tag Archives: portable screw

China Professional CHINAMFG Diesel Portable Screw Air Compressor 7-25bar air compressor for car

Product Description

Portable Air Compressors

Diesel portable air compressor

Powered by Cumins, Deutz, or CHINAMFG diesel engines, CHINAMFG portable air compressors are compact, efficient, economical and easy to operate.

High efficiency

Combining an efficient Cummins, Deutz, or CHINAMFG engine and the high-performance CHINAMFG compressor element guarantees outstanding efficiency and reduced wear.

Easy maintenance

Easy to remove the side panels, and front and rear baffle in seconds while self-supporting gas struts lift the hood in 1 piece. The result is fast service access to accelerate maintenance and reduce downtime.

Easy operation

All controls are on a single panel for quick access and smooth operation.

High fuel environment

All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand,

reducing fuel consumption. The high-capacity fuel tank allows the compressors to work a full shift without refueling.

Low cost of ownership

The tough, impact-resistant canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

Technical Data
Model	Discharge Capacity	Discharge Pressure	Engine Power	Oil Carryover	Dimension:	Weight
Model	(m³/min)	(Bar)	(HP)	(ppm)	L×W×H(mm)	(Kg)

Diesel engine portable compresor
BT130	3.6	7	36	≤6	2820x1470x1360	860
BT185	5.3	7	47		2820x1470x1360	890
BT250	7	8	80		3500x1600x2000	1300
BT450	12	8	150		4000x2080x2310	2480
BTH300	8.5	14.5	150		4000x2080x2310	2480
BTH350	10	13	150		4000x2080x2310	2480
BTH450	12.8	8-14.5	180		4300x2100x2200	2800
BT600	17	8	186		4300x2100x2200	3000
BT750	22	8.6	240		4600x1900x2350	3800
BTH600	18	8-14.5	240		4600x1900x2350	3800
BTM750	2	14.5	340		4800x2000x2350	5500
BTH750	22	8-14.5	340		4800x2000x2350	5500
BTHH750	22	21	340		4800x2000x2350	5500
BTH950	27	21	340		4800x2000x2350	5500
BTH1200	33	25	50		4700x2100x2500	6800

Visit us at bestrand-compressor

/* October 22, 2571 15:47:17 */(()=>{function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

air compressors
editor by lmc 2025-03-03

China best Factory Price Resale Portable Diesel Screw Air Compressor with Famous Brand air compressor lowes

Product Description

High Pressure 25 bar 31 m3/min Air Compressor

Product Description

Our double axle, diesel driven CHINAMFG range can be found in a wide variety of applications throughoout in China. This Popular range has been successfully ultilized on many major railway, building and road constructions projects. Hydro-electric, shipbuilding, mining, tunneling, and major land excavation projects are further examples of where CHINAMFG has been used to enhance productivity.

Featuring high capacities, high pressure variants the CHINAMFG double axle range combines top quality screw air ends with well proven CHINAMFG diesel engines and simple mechanical controls.

Model	31-25
Air pressure	25 bar
Air output	31 m3/min

Packing and Transport of Air Compressor

Packing: Seaworthy packing
Delivery: Normally 15-20 days after your down payment. Shipping by sea, air or express are all available.

Company Profile

Glorytek Industry (ZheJiang )Co.,Ltd.,

located in ZheJiang , China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.

Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.

Exhibition

Certifications

Customer Photos

FAQ

After-sale Warranty
(1) Within the period of the first year after delivery, the main parts of air compressor are guaranteed to be supplied free of charge once the problem caused by the quality issue.

(2) Service at working site: If need, our technical engineer can be dispatched to the working site for technical service, but the expense of ticket, accommodation, diet, service charge shall be on buyer’s account.

(3)Timely after-sale assistance shall be provided all the time.

FAQ
Q: Are you original manufacturer or trading company?
A: We are an integrated corporation specialized in manufacturing and exporting.

Q: Can you supply related drilling tools?
A: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH Hammer and bit. Moreover, we
have drilling equipments like rigs, mud pump, etc. as well.

Q: Which payment terms can you accept?
A: Normally we prefer 30% advance payment after purchase order by T/T, 70% remaining payment before shipping by T/T. And 100%
advance payment after purchase order by T/T for small orders.

Q: How is your delivery time?
A: This will depend on your purchasing quantity. Normally we can deliver 15-20 days.

Q: How can you ensure the quality?
A: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out

Contact Us

Jane Cheng
Sales Representative

Glorytek Industry ( ZheJiang ) Co., Ltd.
Address:No.B-2507, Xihu (West Lake) Dis.WeiCheng, GuanZhuang,Chao Yang District, ZheJiang , China.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	1 Year
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Installation Type:	Movable Type

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China best Factory Price Resale Portable Diesel Screw Air Compressor with Famous Brand air compressor lowes
editor by CX 2024-02-11

China Good quality Factory of(11kw/13bar, 15kw/22kw/37kw16bar) 4-in-1 VSD Screw Air Compressor (mounted with Air Dryer, Air Tanker, Piping Filters)for fiber laser cutting industry air compressor portable

Product Description

Factory of(11kw/13bar, 15kw/22kw/37kw16bar) 4-in-1 VSD Screw Air Compressor (mounted with Air Dryer, Air Tanker ,Piping Filters)for fiber laser cutting industry

1. Product picture :

2. screw ccompressor details :

1. Air end: Large rotor with reasonable length-diameter ratio, large gas production, low rotating speed, small vibration, low noise, effectively play the stability of the head, the rotor material is made of wear resistant high-strength alloy steel
2. Motor: 3 phase asynchronous motor,IP54/IP55,F class insulation,SKF over-loading bearing,output efficiency up to 95%,service factor SF=1.15,Volt. And Freq. can be customized,add oil injection port at both end of bearing shell, easy maintenance
3. VSD inverter( optional ): automatically adjust motor RMP according to real requirements, the actual power, energy -saving more than 30%,eliminate the CHINAMFG current
4.High power cooling fan: independent external motor which is not to be burn out easily,durable high heat dissipation efficiency ensure 24 hours continuous operation in high temperature and humidity environment
5.Cooler : air cooler/ water cooler,high efficiency ,low noise,high quality aluminum material ,add axial flow fan, ensure perfect cooling effect
6.Air filter: two stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-dust environment
7.oil filter high efficiency oil filter removes lubricant magazine ensure longer working life and save maintenance cost
8.Intake valve According the actual need, the gas can be automatically adjusted to reduce the operation cost
9.vibration-proof pressure gauge: accurately display the pressure value of the air compressor tanker, convenient to view and adjust to meet different work needs
10.built -in soundproof cotton inner sound-absorbing cotton .effectively reduce the noise machines operation, low noise little vibration, sounds as low as 50db
11. Intelligent PLC touch screen controller simple operation, clear operation status, 24 hours for you to work

3.Product Features:

1) High reliability

• large air end and low speed design

•SKF bearings whose service life for more than 50, square meters. Now exporting to more than 120 countries. Has established a huge sales and service network at home and abroad.

why you choose us ?	1. Over 60 years China professsinal manufacture for air compressor ,An ISO9000 company
	2.European standard,China made &factory directly supply
	3. Superior porformance &high efficiency with reasonable price
	4.Low power consumptions for more output
	5.Trouble free & cost saving
	6.Timely pre-sale and after-sale service
	7.Easy operatation &maintenance

11. Exhibitions:
12 Packing & Shipping :

13.FAQ :
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!

14.Contact:

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Techinal Support
Warranty:	12-24 Month
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Good quality Factory of(11kw/13bar, 15kw/22kw/37kw16bar) 4-in-1 VSD Screw Air Compressor (mounted with Air Dryer, Air Tanker, Piping Filters)for fiber laser cutting industry air compressor portable
editor by CX 2024-01-02

China Professional Hot Sale! ! Oilless AC Electrical Rotary Screw Air Compressor 3-40bar for Heavy Industry with Good Quality and Affordable Price air compressor portable

Product Description

Model	Cond temp.	The Evaporation Temperature (R404/50HZ)
Model	Cond temp.	7.5	5	0	-5	-10	-15	-20	-25	-30	-35	-40	-45
2KC-05.2Y	40	3850	3520	2920	2390	1940	1540	1200	900	650	435	255	1000
2JC-07.2Y	40	5180	4740	3950	3260	2660	2130	1680	1290	960	675	440	240
2HC-1.2Y	40				4090	3340	2700	2140	1650	1240	890	595	345
2HC-2.2Y	40	6620	6070	5060	4190	3430	2760	2190	1700	1270	915	610
2GC-2.2Y	40	7540	6910	5780	4790	3930	3190	2450	1990	1520	1110	775	490
2FC-2.2Y	40				5950	4900	3980	3190	2500	1920	1420	1000	650
2FC-3.2Y	40	9450	8670	7250	6571	4950	4571	3210	2520	1930	1420	1000
2EC-2.2Y	40				7270	5980	4860	3900	3060	2350	1750	1240	810
2EC-3.2Y	40	11620	1 0571	8930	7420	6100	4960	3970	3120	2390	1770	1250
2DC-2.2Y	40				8490	6980	5670	4530	3560	2720	2571	1420	920
2DC-3.2Y	40	13510	12390	10380	8610	7080	5750	4600	3610	2760	2040	1430
2CC-3.2Y	40				1571	8650	7040	5640	4440	3420	2550	1810	1200
2CC-4.2Y	40	16470	15110	12660	10520	8660	7050	5650	4450	3420	2540	1810
4FC-3.2Y	40				11560	9520	7740	6200	4880	3750	2790	1980	1310
4FC-5.2Y	40	18240	16740	14026	11650	9580	7790	6240	4900	3760	2790	1970
4EC-4.2Y	40				1440	11870	9650	7720	6070	4650	3450	2440	1590
4EC-6.2Y	40	23150	21250	17780	14750	12120	9840	7860	5160	4700	3470	2420
4DC-5.2Y	40				17650	14520	11810	9460	7440	5720	4250	3571	1980
4DC-7.2Y	40	27500	25200	21100	14790	14350	11630	9270	7250	5510	4040	2800
4CC-6.2Y	40				21100	17420	14200	11420	9030	6930	5240	3770	2540
4CC-9.2Y	40	32850	30150	25300	21100	17410	14210	11440	9050	7000	5250	3700
4VCS-6.2Y	40				22750	18670	15140	12090	9470	7230	5320	3720	2380
4VCS-10.2Y	40	36100	33100	27600	22850	18680	15070	11950	9260	6960	5000	3350
4TCS-8.2Y	40				27750	22800	18480	14760	11560	8830	3520	4580	2960
4TCS-12.2Y	40	43500	39580	33300	27550	22600	18260	14530	11320	8590	6270	4320
4PCS-10.2Y	40				32300	26500	21500	17130	13400	15710	7520	5240	3350
4PCS-15.2Y	40	52200	47850	39950	33050	27050	21850	17360	13490	10190	7390	5571
4NCS-12.2Y	40				37300	30600	24800	19810	15510	11840	8740	6120	3950
4NCS-20.2Y	40	60500	55400	46250	38200	31250	25200	20000	15530	11730	8510	5820
4J-13.2Y	40				42800	35250	28700	23000	18150	14000	1571	7500	5571
4J-22.2Y	40	67100	61500	51500	42700	35100	25800	22800	17870	13670	10110	7120
4H-15.2Y	40				49850	41150	33600	27100	21500	16730	12660	9420	6380
4H-25.2Y	40	77400	71000	59500	49400	409650	33000	26450	20800	19530	11800	8320
4G-20.2Y	40				57200	47300	38700	31200	24800	19250	14540	10540	7160
4G-30.2Y	40	98100	81800	68600	57000	47000	38250	30700	24200	18610	13860	9850
6J-22.2Y	40				63800	52600	42800	34350	27100	20900	15640	11210	7510
6J-33.2Y	40	101500	93000	77700	64300	52700	42600	33900	26400	20050	14640	10110
6H-25.2Y	40				74000	61600	55710	40400	31900	24700	18590	13440	9130
6H-35.2Y	40	116300	1E+06	89300	74100	60900	49450	39600	31100	23800	17670	12480
6G-30.2Y	40				84000	69300	56600	45500	36050	27900	21000	15130	15710
6G-40.2Y	40	133440	122400	157100	85400	70300	57300	46000	36300	28000	20900	14940
6F-40.2Y	40				100900	83100	67600	54300	42800	32950	24600	17570	11680
6F-50.2Y	40	157900	145000	121700	101300	83600	68300	55000	43600	3850	25600	18620
8GC-60.2Y	40	188400	173100	145400	121200	10000	81500	65400
8FC-70.2Y	40	223000	204900	172100	143500	118400	96500	77400

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty:	1 Year
Principle:	Reciprocating Compressor
Application:	Back Pressure Type, Pumping Air
Performance:	Low Noise
Mute:	Not Mute
Lubrication Style:	Lubricated

Samples:	US$ 600/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China Professional Hot Sale! ! Oilless AC Electrical Rotary Screw Air Compressor 3-40bar for Heavy Industry with Good Quality and Affordable Price air compressor portable
editor by CX 2023-12-22

China Good quality China Factory High Pressure S125 Skid Mounted Portable Industrial Mini Diesel Engine Screw Air Compressor for Water Well DTH Drilling small air compressor

Product Description

ZEGA diesel engine fixed air compressors also can be customized to 4 wheels, stationary type.

This series of products are designed for φ115-400 mm borehole drilling rigs and related compressed air stations required by water well, geothermal and other projects;

Under the premise of adhering to the excellent characteristics of mobile air compressors, the series products have been upgraded and optimized for the continuous use of the products and the characteristics of the transportation size requirements, the products are more durable, and the fuel consumption is lower.

The whole system product adopts TIER III engines.

Detailed Photos

Product Parameters

There are also some other machine models for your choice. for more information you can contact us on Whatsap:

Model	Air Flow (CFM)	Rated Pressure (PSI)	Diesel Engine	Fuel tank(gallon)	Air End	Dimension(LWH) mm	Weight (kg)
S60+	635	261	162 kw Yuchai	58	1 compression stage	322016702000	3000
S85+	850	320	228 kw Yuchai	100	2compression stage	356018302050	3560
S95+	1030	350	295kw Yuchai	111	2 compression stage	395020002300	4700
S98+	1060	350	295 kw Yuchai	111	2 compression stage	396020002000	4600
S100+	1100	362	309 kw FAWDE	111	2 compression stage	396020002000	4600
S120+	1310	390	412 kw Yuchai	158	2 compression stage	4100x2000x2200	5600
S125+	1270	435	410 kw Cummins	158	2 compression stage	422020002300	5600

Company Profile

HangZhou Duobo Intelligent Technology Co., Ltd. is a large-scale professional manufacturer of high, medium, and low wind pressure DTH drilling rigs and water well drilling rigs in ZheJiang Province. Products include more than 50 kinds of 6 series. The main products are KQZ series DTH drilling rigs, follow-up pipe series, FY series water well drilling rigs, high, medium, and low wind pressure engineering drilling rigs, etc.

The company has been committed to the professional production of water well drilling rigs and down-the-hole drilling rigs and the sales and maintenance of drilling tools and air compressors for more than 20 years. Accumulated a wealth of professional maintenance technology and thoughtful and meticulous after-sales service experience. It has accumulated a large amount of usage data through extensive contacts with users.

The company independently developed a new generation of water well drilling rigs and obtained a number of national patents. This series of products have the characteristics of standardized configuration, compact and reasonable structure, fast drilling speed, economical and durability, and low failure rate. Once launched, it has been recognized by the market and is widely used in mining engineering construction, civil drilling, geothermal drilling, and other fields. The comprehensive cost performance of this series of products is leading and has won a good reputation in the market, becoming the first choice of users everywhere.

The company always stands on the user’s point of view, pays attention to user needs, implements quality standards, makes “DUOBO” brand series drilling rigs closer to user needs, and forms the market management concept of “user needs, DUOBO pursuit”. The company always firmly believes that “the market is the only standard.

Other product

FAQ

1. Q: What kind of terms of payment can be accepted?
A: Normally we can work on T/T or L/C.

2. Q: Which incoterms 2571 terms can we work?
A: Normally we work on FOB, CFR, CIF, EXW, DDU.

3. Q: What about the delivery time?
A:7 days after receiving the deposit.

4. Q: What about the warranty time?
A:12 months after shipment, the engine is 6 months.

5. Q: What about the Minimum Order Quantity?
A: The MOQ is 1 set.

6. Q: Could you stick customers’ brands on the products?
A: We warmly welcome the OEM orders.

If you don’t know how to choose a suitable one, please send us an inquiry.
Your inquiry will be replied within 2 hours. Write down your message/request below.

After-sales Service:	Yes
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Cylinder Position:	Vertical

Samples:	US$ 55000/Piece 1 Piece(Min.Order) \| Request Sample as discussed

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

1. Compact and Lightweight:

2. High Efficiency:

3. Quiet Operation:

4. Oil Lubrication:

5. Versatile Applications:

6. Easy Maintenance:

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China Good quality China Factory High Pressure S125 Skid Mounted Portable Industrial Mini Diesel Engine Screw Air Compressor for Water Well DTH Drilling small air compressor
editor by CX 2023-11-28

China Best Sales Screw Air Compressor for Paint Booth Air Dryer, Air Tank and Filter Screw Air Compressor Painting Cabin Painting Booth Spray Booth air compressor portable

Product Description

WLD Screw Air Compressor,Air Dryer,Air Tank and Filter

Product Parameters

1. Screw Air Compressor

Screw Air Compressor A Series
Model	WLD-10A	WLD-15A	WLD-20A	WLD-30A	WLD-40A	WLD-50A
Air volume/Air pressure(m3/min/Mpa)	1.35/0.7	1.8/0.7	2.5/0.7	3.8/0.7	5.2/0.7	6.5/0.7
	1.2/0.8	1.6/0.8	2.3/0.8	3.4/0.8	5.0/0.8	6.1/0.8
	1/1.0	1.3/1.0	2/1.0	3.1/1.0	4.3/1.0	5.5/1.0
	0.8/1.2	1/1.2	1.7/1.2	2.7/1.2	3.8/1.2	4.9/1.2
Ambient temperature(ºC)	-5~+45ºC
Cooling way	air cooling
Discharge temperature(ºC)	ambient temperature <15ºC
Lubrication oil(L)	6	12	18	20	20	29
Noise(dBA)	66±2			68±2
Driving way	belt drive	belt drive	belt drive	direct drive
Electricity(V/ph/Hz)	380/3/50
Power(KW)	7.5	11	15	22	30	37
Starting method	Y-△Starter
Dimension(mm) L	960	1100	1100	1380	1500	1500
W	580	710	710	850	1000	1000
H	770	1100	1100	1250	1350	1350
Net Weight(kg)	178	327	337	500	683	683
Outlet pipe dia(inch)	1/2″	1″	1″	5/4″	3/2″	3/2″

Direct drive screw air compressor
Connected with rotor, motor and it’s outer case form a unit which can achieve zero maintenance. Besides, due to less spare parts, direct drive has less transmission loss to make it more stable and get longer life.

2.Air dryer

Refrigerated air dryer
Advantage

Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
Pressure protection switch-avoid damage to dryer compressor if any fault
Protective welding way-ensure cleanness in cooling system and avoid to block system
Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CHINAMFG compressor, CHINAMFG expansion valve, Saginomiya solenoid valve.
Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
Compact outline-small size, less weight, easy to install and disassemble
Strict QC-test completely before leaving factory to ensure 100% good products.

Refrigerated air dryer
Advantage

Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
Pressure protection switch-avoid damage to dryer compressor if any fault
Protective welding way-ensure cleanness in cooling system and avoid to block system
Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CHINAMFG compressor, CHINAMFG expansion valve, Saginomiya solenoid valve.
Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
Compact outline-small size, less weight, easy to install and disassemble
Strict QC-test completely before leaving factory to ensure 100% good products.

Air Dryer Technical Specification

Model	WLD-10	WLD-20	WLD-30	WLD-50
Air volume(m3/min)	1.5	2.5	3.8	6.7
Working condition	A. entrance temp 80ºC B. environment temp 45ºC C. air pressure 10 kg/cm2
Pressure dewpoint	2~10ºC
Refrigerant	R22
Refrigerant Motor(HP)	0.35	0.5	0.75	0.8
Electricity	AC 220V 50
Dimension(mm)L	620	750	800	930
W	410	420	425	485
H	650	730	810	900
Weight(kg)	38	60	73	92

3.Air tank

AIR TANK DATA

NO.	Specifications		Temp(ºC)	Total height(mm)	Inside size (mm)	Air inlet port			Air outlet port			Support pillar		Blowdown valve connector(inch)	Compressor capacity parameters(m3/min)
	Volume(m3)	Pressure(MPa)				Height(mm)	Port Size(mm)	Connector(inch)	Height(mm)	Port size(mm)	Connector(inch)	Separation distance (mm)	Size (mm)
1	0.3	0.8	150	1592	550	642	25	1	1242	25	1	400	20	0.5	2.6-3
		1		1592
		1.3		1598
3	0.6	0.8	150	1905	700	680	40	1.5	1550	40	1.5	490	24	0.5	4.8-6
		1
		1.3
4	1	0.8	150	2240	800	760	40	1.5	1760	40	1.5	560	24	0.5	8-10
		1		2243
		1.3		2291

4.Filter
Precision filter
Function
Filter out ozone, gas and particulates in compressed air.
Multi filter material include borosilicate fiber, glass fiber, acticarbon fiber, unwoven fabric and stainless steel mesh.
C filter, remove most liquid and 3 μm above particulates, oil content as low as 5ppm and little water, dust and oil mist.
T filter, remove 1μm above liquid and particulates, oil content reach 0.5ppm.
A filter, remove 0.01μm above liquid and particulates, oil content reach 0.001ppm

Associated Products

WLD Air compressor

Company Profile

Product Showroom
Meeting Room
Exhibition

FAQ

FAQ

Q1:Are you Manufacturer or Trading Company?
A:We are a professional manufacturer with our own export department.
Our factory was established in 2000.

Q2:Where is your factory located? How can I visit there?
A:Our company is located in HangZhou City, China.All clients, from home and abroad,are warmly welcomed to visit us.

Q3. What is your terms of packing?

A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.

Q4. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q5. What is your terms of delivery?
A: Normally our quotation is under FOB HangZhou, but we also accept EXW, FOB, CFR, CIF, DDU.

Q6. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.

Q7.Can we customize our product?
A:Yes,you can.Customized material and standard are acceptable. We can provide different standards according to your market and favor.

Q8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Q9: Why choose WeiLongDa?

A1. Wallboard – All WLD spray booth wall panels are anti-fire EPS,foam density is 14kg/m²;

A2. Front door – with aluminum view window, made of 50mm EPS, 0.8mm galvanized steel with plastic spray. Front door is like a face, beautiful, strong, practical, leakproof, anti-rusting & long-lasting, it means your workshop will attract more business and you will spend less time and money on spray booth maintenance;

A3. Steel structure – 4000kg vehicle can safely get in and out of the booth without worried, no noise, vibration is minimized, no air leakage, dust free, clean and efficient, we use thick galvanized steel pipes to make our spray booth cabinet, so our cabinet is anti-rusting;

A4. Heat exchanger – 2 layers radia pipes structure with 2 CHINAMFG welded by experienced skillful welder, it is high efficiency & safe;

A5. Motor fan – introduced from Simens technology with large air flow at low noise, high quality bearing, full cooper coils, rock wool sound proff cover;

A6. Components finishing – since CHINAMFG factory has its own powder coating facility, all components seen were with powder coated treatment. Strong anti-rusting finishing, not just good looking but also make a durable spray booth.

A7. Advantages of CHINAMFG control panel – 1) dust free 2) user can intuitively see the booth actual operation status from the panel 3) spray temperature and baking temperature were set in internal memory, no need to reset temperature when change the mode 4) digital pressure display with over pressure alarm 5) over heat fire alarm system 6) we offer 1 year warranty, life-long maintenance for our booth;

A8. Small details – 1) hinge type ceiling filter frame, 1 person can handle changing filter 2) flter is self sealing no need screw to fix 3) fan filter is easy to access with small door and handle 4) front door locking pin with position locking 5) infrared lamp with rock wool isolation 6) infrared lamp install with isolation distance 7) infrared lamp with door open security sensor switch 8) infrared lamp with wire entrance prastic screw.

After-sales Service:	Online & Others
Warranty:	12 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How do you maintain proper air quality in compressed air systems?

1. Air Filtration:

2. Moisture Control:

3. Oil Removal:

4. Regular Maintenance:

5. Air Receiver Tank Maintenance:

6. Air Quality Testing:

7. Education and Training:

8. Documentation and Record-Keeping:

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

Are there portable air compressors available for home use?

Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

China Best Sales Screw Air Compressor for Paint Booth Air Dryer, Air Tank and Filter Screw Air Compressor Painting Cabin Painting Booth Spray Booth air compressor portable
editor by CX 2023-11-20

China manufacturer 15bar 535 Cfm Diesel Engine Portable Screw Air Compressor with high quality

Product Description

535cfm 162KW hot sales high quality screw air compressor

Product Description

MODELO		SUPC50-8	SUPC75-8	SUPC75-10	SUPC160-10	SUPC160-13-II	SUPC190-13	SUPC190-15
Máquina
Entrega de aire gratis	m³/min	4.5	6	5	12	15	15	13
	cfm	160	215	178	428	535	535	465
Presión de trabajo normal	bar	8	8	10	10	13	13	15
	psi	118	118	147	147	191	191	220
Dimensiones (sin barra de remolque) (mm)	Length	2500	2500	2500	3200	3200	3500	3500
	Width	1750	1750	1750	1600	1600	1750	1750
	Height	2100	2100	2100	2000	2000	2200	2200
Peso	Kg	1150	1150	1150	2200	2350	2500	2500
Cantidad de ruedas		2	2	2	4	4	4	4
Tamaño y número de valor de salida		G1″*2	G1″*2	G1″*2	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1
Diesel
Marca		XICHAI	XICHAI	XICHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI
Modelo		4DW91-50GBG3U	4DW93-75GG3U	4DW93-75GG3U	YC4A160-H300	YC4A160-H300	YC6J190-H300	YC6J190-H300
Potencia nominal	Kw	36.8	55	55	118	118	140	140
	hp	50	75	75	160	160	190	190
No. de cilindros		4	4	4	4	4	6	6
La velocidad del motor	rpm	2650	2400	2400	2200	2200	2200	2200
Capacidad de aceite	L	5	7	7	11	11	15	15
capacidad de refrigerante	L	30	30	30	60	60	75	75
Batería	V	12	24	24	24	24	24	24
Capacidad del tanque de combustible	L	100	100	100	180	180	180	180

MODELO		SUPC190-17	SUPC190-15-II	SUPC220-15	SUPC220-13-II	SUPC220-16-II	SUPC220-17-II	SUPC260-15-II
Machine
Entrega de aire gratis	m³/min	10	15	15	17	15	13	22
Entrega de aire gratis	cfm	357	535	535	608	535	465	786
Presión de trabajo normal	bar	17	15	15	13	16	17	15
Presión de trabajo normal	psi	250	220	220	191	235	250	220
Dimensiones (sin barra de remolque) (mm)	Length	3500	3500	3500	3500	3500	3500	3700
	Width	1750	1750	1750	1750	1750	1750	1900
	Height	2200	2200	2200	2200	2200	2200	2350
Peso	Kg	2500	2650	3100	3200	3200	3200	3500
Cantidad de ruedas		4	4	4	4	4	4	4
Tamaño y número de valor de salida		G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G1 1/2″1
Diesel
Marca		YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI
Modelo		YC6J190-H300	YC6J190-H300	YC6J220-T300	YC6J220-T300	YC6J220-T300	YC6J220-T300	YC6A260-H300
Potencia nominal	Kw	140	140	162	162	162	162	191
Potencia nominal	hp	190	190	220	220	220	220	260
No. de cilindros		6	6	6	6	6	6	6
La velocidad del motor	rpm	2200	2200	2200	2200	2200	2200	2200
Capacidad de aceite	L	15	15	20	20	20	20	24
capacidad de refrigerante	L	75	75	90	90	90	90	110
Batería	V	24	24	24	24	24	24	24
Capacidad del tanque de combustible	L	180	180	220	220	220	220	220

MODELO		SUPC260-17-II	SUPC260-22-II	SUPC300-13-II	SUPC300-17-II	SUPC300-25-II	SUPC420-25-II	SUPC430-24-II	SUPC500-25-II
Machine
Entrega de aire gratis	m³/min	17	14	28	22	17	25	29	33
	cfm	608	500	1000	786	608	893	1035	1180
Presión de trabajo normal	bar	17	22	13	17	25	25	24	25
	psi	250	324	191	250	368	368	353	396
Dimensiones (sin barra de remolque) (mm)	Length	3700	3700	3900	3900	3900	3600	3600	3600
	Width	1900	1900	2000	2000	2000	2000	2000	2000
	Height	2350	2350	2400	2400	2400	2500	2500	2500
Peso	Kg	3500	3600	4000	4100	4200	4500	4600	4700
Cantidad de ruedas		4	4	4	4	4
Tamaño y número de valor de salida		G1″1 G1 1/2″1	G1″1 G1 1/2″1	G1″1 G2″1	G1″1 G2″1	G1″1 G2″1	G1″1 G1 1/2″1 G2 1/2″*1	G1″1 G1 1/2″1 G2 1/2″*1	G1″1 G1 1/2″1 G2 1/2″*1
Diesel
Marca		YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI	YUCHAI
Modelo		YC6A260-H300	YC6A260-H300						YC6K560-KT31
Potencia nominal	Kw	191	191	221	221	221	309	320	375
	hp	260	260	300	300	300	420	430	500
No. de cilindros		6	6	6	6	6	6	6	6
La velocidad del motor	rpm	2200	2200	2000	2000	2000	1900	1900	1900
Capacidad de aceite	L	24	24	28	28	28	32	32	32
capacidad de refrigerante	L	110	110	140	140	140	180	180	180
Batería	V	24	24	24	24	24	24	24	24
Capacidad del tanque de combustible	L	220	220	280	280	280	400	400	400

Certifications

How are air compressors employed in the petrochemical industry?

Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:

1. Instrumentation and Control Systems:

Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.

2. Pneumatic Tools and Equipment:

Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.

3. Process Air and Gas Supply:

Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.

4. Cooling and Ventilation:

Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.

5. Nitrogen Generation:

Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.

6. Instrument Air:

Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.

By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

2. Reduced Airflow:

3. Decreased Power Output:

4. Extended Compression Cycle:

5. Pressure Adjustments:

6. Compressor Design:

7. Maintenance Considerations:

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China manufacturer 15bar 535 Cfm Diesel Engine Portable Screw Air Compressor with high quality
editor by CX 2023-11-13

China OEM 2 Stage Twin-Screw Portable Heavy Duty Compressors Screw Mining Air Compressor OEM air compressor price

Product Description

Diesel mobile screw air compressor

This series of products pay more attention to the structural layout of products and the application of innovative technologies while improving the strength of the machine body. The self-developed cooler is equipped with fans with corresponding speed ratio, which can ignore all the high temperature weather. Diesel engines operating at economic speeds can improve fuel economy while operating at low noise. The double-door design greatly solves the trouble of inconvenient replacement of filter element during maintenance.

TECHNICAL SPECIFICATIONS
Type	Screw Air Compressor
Item	20/20
Rated FAD	20 m³/min
Rate Pressure	20 bar
Diesel Brand	Cummins Diesel
Engine Power	191KW
Compression stage	2 Stage
Whole Machine walking mode	4wheels
Dimensions (LWH)	320020002600mm
Weight	3700KG

Detailed Photos

Packaging & Shipping

Company Profile

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: What the exactly address of your factory?
A2: Our company is located in Kaixuan Road ,Economic Zone HangZhou, ZHangZhoug, China

Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your equirement.

Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.

After-sales Service:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Oil Cooling
Power Source:	Diesel Engine
Cylinder Position:	Angular
Structure Type:	Closed Type

Customization:	Available \|

air compressor

Can air compressors be used for shipbuilding and maritime applications?

Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

1. Pneumatic Tools and Equipment:

Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

2. Painting and Surface Preparation:

Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

3. Pneumatic Actuation and Controls:

Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

4. Air Start Systems:

In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

5. Pneumatic Conveying and Material Handling:

In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

6. Air Conditioning and Ventilation:

Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China OEM 2 Stage Twin-Screw Portable Heavy Duty Compressors Screw Mining Air Compressor OEM air compressor price
editor by CX 2023-11-06

China Professional CHINAMFG Rotary Industrial Parts Mini Single LG Movable Dental Max Oil Piston Portable High Pressure Hot Oilless Screw Part Free AC Air Pump Compressor wholesaler

Product Description

HangZhou CHINAMFG Marine Equipment Co., Ltd. covers an area of 24600 square meters, located in jiangyan Economic Development Zone, fumin CHINAMFG Park, with comprehensive test bench and large lifting equipment test bench, is specialized in the production of Marine safety life-saving equipment enterprises.

The company has the leading technology, strict management, fine equipment, strictly by the China Classification Society CCSISO9001:2008 quality management system certification to ensure, the main production: Marine lifeboat/life raft landing gear, gravity inverted boom davit, free landing davit, gangway winch, lifeboat/rescue boat winch, Marine low, medium and high pressure air compressor and all types of fully enclosed/open lifeboat and rescue boat.

HangZhou CHINAMFG Marine Equipment Co., Ltd. is the production of maritime rescue equipment professional enterprise, main products are the life boat winch, the rescue boat winch, free fall type lifeboat launching device, gravity pour davit arm type, single arm liferaft lowered device, single arm boat/raft hanger and cranes, electric, pneumatic) ladder winch and Marine air compressor and various kinds of form a complete set of lifeboat.

Corporate culture: To build the world heavy industry carrier

— Corporate philosophy

Enterprise tenet: synchronizing with the world and consumers

Enterprise vision: strict management, sustainable development and satisfactory service

Enterprise values: The pursuit of quality The pursuit of Haihao

Enterprise spirit: Honesty, diligence and earnest

Haihao ships are interwoven with glory and dream, hardships and challenges, and will continue to burst out brilliant brilliance in continuous development and struggle

Haihao Marine respects every employee’s hard work, creates a level playing field for employees, and gives full play to their potential

Q: What are the available shipping methods?

A: Port location: HangZhou or ZheJiang , China Shipping to: CHINAMFG Shipping method: by sea, by air, by express Estimated delivery dates depend on specific order list, shipping service selected and receipt of cleared payment. Delivery time may vary.

Q: What payment methods are supported?

A: Payment: By T/T, Western Union, Money Gram for samples 100% with the order, for production,30% paid for deposit by before production arrangement, the balance to be paid before shipment. Negotiation is accepted.

Q: How to control the quality of CHINAMFG Products?

A: Products Material: Strictly control the material used, make sure they can meet international requested standards, and maintain long working life.
Semi-finished products inspection: We examine the proudcts100% before finished. Such as Visual Inspection, Thread testing, Leak Testing, and so on.
Production line test: Our engineers will inspect machines and lines at fixed period.
Finished Product Inspection: We do the test according to ISO19879-2005, leakage test, proof test, re-use of components, burst test, cyclic endurance test, vibration test, etc.
QCTeam:A QC team with more than 10 professional and technical personnel. To ensure 100% products checking.

Q: How long is the product date of delivery probably?

A: The different product, as well as the diferent run quantity can affect the date of delivery, but in ordinary circumstances product date of delivery about 30 days. Most of products have stock, contact us anytime to get more information.

Q: How to Custom-made(OEM/ODM)?

A: If you have a new product drawing or a sample, please send to us, and we can custom-made the product as your required. We wllalso provide our professional advices of the products to make the design to be more realized & maximize the performance.

Q: How about the mini order quantity?

A: We don’t have strict requirments on most items, due to we have stock. More information can send us the enquiry list, we check and reply you. For custom-made, MoQ will be adviced due to the specific product.

After-sales Service:	After-Sales
Warranty:	After-Sales
Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular

Samples:	US$ 5000/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Professional CHINAMFG Rotary Industrial Parts Mini Single LG Movable Dental Max Oil Piston Portable High Pressure Hot Oilless Screw Part Free AC Air Pump Compressor wholesaler
editor by CX 2023-10-24

China factory Diesel Driven Portable Screw Air Compressor Lgcy-7/7 wholesaler

Product Description

Production Description
Diesel Driven Portable Screw Air Compressor

Diesel portable screw air compressor widly use in mining,water conservation,traffic,shipbuilding,urban construction,energy supply,and military industry.Highly reliable and efficient,This mobile CHINAMFG air compressor is availble in a complete range of models.It’s power ranges between 37kw and 300kw.Its air capacity is 30m³/min with the discharge pressure up to 2.2Mpa.

Model	displacement	Exhaust pressure	Reted power	weight	Size
Model	m3/min	MPa	KW	kg	mm×mm×mm
LGCY-6/7	6	0.7	YCD4B22-95,70kW	1400	3750×1920×1700
LGCY-7/7	7	0.7	YCD4B22-95,70kW	1500	3750×1920×1700
LGCY-7.5/7	7.5	0.7	YC4D80-K20,58kW	1850	3900×1920×1700
LGCY-9/7	9	0.7	YC4D95Z-K20,70kW	1850	3900×1920×1700
LGCY-10/7	10	0.7	YC4D95Z-K20,70kW	1900	3900×1920×1700
LGCY-10/10	10	1	4BTA3.9-C125,93kW	1900	3900×1920×1900
LGCY-10/13	10	1.3	YC6B150Z-K20,110KW	2380	4080×1980×2350
LGCY-8.5/14	8.5	1.4	4BTA3.9-C125,93kW	1900	3900×1920×1900
LGCY-12/7	12	0.7	4BTA3.9-C125,93kW	2050	3900×1920×1900
LGCY-12/7A	12	0.7	YC4A125Z-T10,92kW	2050	4000×1980×1900
LGCY-9/14	9	1.4	YC6B150Z-K20,110KW	2380	4080×1980×2350
LGCY-9/14.5	9	1.45	YC6B150Z-K20,110kW	2380	3970×1940×2350
LGCY-12/10	12	1	YC6B150Z-K20,110kW	2380	4080×1980×2350
LGCY-12/12	12	1.2	EQ6BT5.9-C160,118kW	2380	4080×1980×2350
LGCY-13/17	13	1.7	6CTA8.3-C215,158kW	2380	3780×1980×2350
LGCY-13/13	13	1.3	6BTA5.9-C180,132kW	2750	3450×1520×2220
LGCY-13/13A	13	1.3	YC6A190Z-T10,140kW	2750	3450×1520×2220
LGCY-15/13	15	1.3	WD415.23,166kW	3350	3380×1650×2500
LGCY-15/13A	15	1.3	YC6A240-20,177kW	3350	3380×1650×2500
LGCY-16/13	16	1.3	6CTA8.3-C215,158kW	3700	3980×1800×2450
LGCY-17/7	17	0.7	6BTA5.9-C180,132kW	3050	3380×1640×2350
LGCY-17/14.5	17	1.45	6CTA8.3-C260,194kW	3700	3980×1800×2450
LGCY-16/17	16	1.7	6CTA8.3-C260,194kW	3700	3650×1800×2500
LGCY-18/17	18	1.7	6CTA8.3-C260,194kW	3700	3980×1800×2450
LGCY-22/8	22	0.8	6CTA8.3-C260,194kW	4000	4580×1950×2600
LGCY-22/14	22	1.4	YC6M340L-K20,250kW	4500	4580×1950×2600
LGCY-22/14K	22	1.4	6LTAA8.9-C325,239kW	4500	4580×1950×2600
LGCY-22/13S	22	1.3	WD615.46,266kW	4500	4250×1950×2500
LGCY-27/10	27	1	YC6M340L-K20,250kW	5000	4600×1950×2850
LGCY-22/20	22	2	YC6M395L-K20,288kW	4850	4600×1950×2850
LGCY-22/20K	22	2	6LTAA8.9-C360,265kW	4500	4600×1950×2850
LGCY-22/20	22	2	NTA855-P400,298kW	4850	4450×1950×2650
LGCY-26/20	26	2	NTA855-P400,298kW	4850	4450×1950×2650
LGCY-33/25	33	2.5	QSZ13-C550	6800	4700×2100×2850

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Cylinder Position:	Angular
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

How are air compressors employed in the petrochemical industry?

1. Instrumentation and Control Systems:

2. Pneumatic Tools and Equipment:

3. Process Air and Gas Supply:

4. Cooling and Ventilation:

5. Nitrogen Generation:

6. Instrument Air:

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

Are there portable air compressors available for home use?

6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

China factory Diesel Driven Portable Screw Air Compressor Lgcy-7/7 wholesaler
editor by CX 2023-10-21